Basic Coasters |
Tool Set | Cut Rough Blanks and hot glue mounting blocks. | for attachment to screw chuck. | Face off front. |
Mark chuck recess, foot ring and
overall diameter guide lines. Marking Gauge Link |
True periphery and mark finished thickness.Set Outside Callipers to diameter for subsequent matching of pieces. | Face off rear face to pencil
witness mark, use callipers to confirm thickness.
|
Using parting tool and skew form base recess and foot ring, shape periphery and finish. |
Reverse on chuck, part off mounting block for reuse. | Face off top surface. | Mark top surface rebate with pencil witness mark at required diameter. | Form central recess with parting tool and square off with wide scraper. |
Sand and apply finish. | Then take it for a trial run. |
Page Revision date:
September 13, 2009, 23.23 Hrs.